Used Jungheinrich Beam - AUF'B'E'0435/1.5-3600-G

Used beam for a safe and stable pallet racking setup

This used Jungheinrich beam is intended as a load-bearing horizontal element in a pallet racking system and, together with the frames, forms the level on which pallets or supports rest. This is type AUF'B'E'0435/1.5 with a length of 3600 mm and a beam profile of 145 x 50 mm, supplied including 2 locking pins for correct securing in the upright profile.

Application in the warehouse

In daily warehouse use, the right beam determines the stability, loading capacity, and layout of your storage locations. This beam is used when creating or restoring a beam pair at the desired height, for example for pallet positions with a span of 3600 mm. The material thickness of 1.5 mm suits professional use where reliable support is important.

Practical for replacement or expansion

For B2B purchasing, this used beam is an efficient solution for damage repair, maintenance, or expansion of existing Jungheinrich pallet racking. Because it is supplied with locking pins, you can proceed quickly with replacement, with minimal downtime and without unnecessary extra parts.

Suitable for pallets

With a beam length of 3600 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which equates to an average maximum pallet width of 806.2 mm. This dimension matches bays specifically set up for this type of pallet.