Used Jungheinrich Beam - AUF'B'E'0435/1.5-3300-G

Reliable used beam for quick repair and expansion of your pallet racking

This used Jungheinrich beam is intended as a load-bearing horizontal component in a pallet racking system and helps you safely repair or expand racking bays without replacing an entire rack. With a length of 3300 mm and a sturdy profile of 145 x 50 mm, this is a practical choice for warehouses where continuity and availability of components are important. The beam is supplied including 2 locking pins for correct locking.

Application in the warehouse

You use the beam to connect two uprights and thereby create a load level for pallets or carriers. This AUF'B'E'0435/1.5 type is suitable when you want to maintain an existing Jungheinrich setup and wish to replace a damaged beam or add an extra level with the same dimensions and appearance.

Practical for replacement or expansion

For B2B maintenance and project-based adjustments, a used beam is an efficient solution: quickly deployable, fitting within an existing racking logic and aimed at limiting downtime. The material thickness of 1.5 mm and the included locking pins support a neat, safe installation in your pallet racking.

Suitable for pallets

With a beam length of 3300 mm, this pair of beams accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets total) also fits. This size matches bays specifically set up for this type of pallet.