Used Jungheinrich Beam - AUF'B'E'0435/1.5-2200-G

Used beam for a safe and stable pallet racking system

This used Jungheinrich beam is intended as a horizontal load-bearing beam in a pallet racking system and, together with the frames, forms the foundation for a reliable storage solution. With a length of 2200 mm and a profile of 145 x 50 mm, this component is suitable when you want to repair an existing racking section or continue building within the same system. The type AUF'B'E'0435/1.5 offers a practical, robust choice for daily warehouse use.

Application in the warehouse

A beam determines the width of the storage position and carries the load of pallets or shelves within the racking. In case of damage from a collision or during reorganization, quick replacement is essential to ensure safety and continuity. This beam is supplied with 2 locking pins, so you can correctly secure the connection with the frame.

Practical for replacement or expansion

For B2B buyers and technical departments, this is an efficient solution for cost-conscious component replacement without unnecessary downtime. The material thickness of 1.5 mm and the standard dimensions make this component suitable for consistent assembly within your Jungheinrich pallet racking system.

Suitable for pallets

With a beam length of 2200 mm, this beam pair can accommodate two block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 euro pallet and 1 block pallet (two pallets total) also fits. This size matches bays specifically configured for this type of pallet.