Used Jungheinrich Beam - AUF'B'E'0415-3900-G

Used beam for reliable load capacity in your pallet racking

This used Jungheinrich beam is intended as a horizontal support beam in a pallet racking system and, together with the uprights, forms a stable level for pallet storage. This is a Lightbeam-type beam with a length of 3900 mm and a profile of 150 x 50 mm, suitable for professional warehouse fit-out where safety and continuity matter. The beam is supplied including 2 locking pins for secure locking in the frame.

Application in the warehouse

A beam determines the storage levels and makes it possible to quickly adjust storage positions to varying pallet sizes and order flows. With a material thickness of 1.75 mm, this component is a practical choice for daily logistical loads, for example when expanding picking locations or repairing a damaged level.

Practical for replacement or expansion

For B2B buyers, this Jungheinrich beam is an efficient solution to make existing racking usable again or to build additional sections without long lead times. Thanks to the included locking pins, you can install it immediately and quickly restore the racking configuration to a safe, workable condition.

Suitable for pallets

With a beam length of 3900 mm, this beam pair provides room for four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which equates to an average maximum pallet width of 881.2 mm. This dimension corresponds to bays specifically arranged for this type of pallet.