Used Jungheinrich Beam - AUF'B'E'0415/1.5-2900-G

Reliable used beam for safely carrying pallet loads

This used Jungheinrich pallet racking beam is intended as a load-bearing element between two frames and forms the basis for stable pallet storage. It is a Lightbeam beam with a length of 2900 mm and a profile of 150 x 50 mm, made from 1.50 mm steel. For extra reliability, 2 locking pins are included, so the beam can be correctly locked into the uprights.

Application in the warehouse

In a pallet racking system, the beam determines the bay width and carries the load of pallets or supports. This Jungheinrich beam is suitable for situations where you want to keep existing racking in operation and replace a missing or damaged component, without unnecessarily investing in complete sections.

Practical for replacement or expansion

With this loose used beam, you keep maintenance and expansion of your racking material flexible. Useful for technical services, warehouse managers, and racking installers who want to switch quickly with suitable beams and can install them immediately thanks to the included locking pins.

Suitable for pallets

With a beam length of 2900 mm, three euro pallets (800 x 1200 mm) fit side by side on this beam pair. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 866.7 mm. Alternatively, a combination of 2 euro pallets and 1 block pallet (three pallets total) also fits. This size matches bays specifically set up for this type of pallet.