Used Esmena beam GNA 15050 - 2200 x 150 x 50 mm

Reliable used beam for safe and stable pallet racking

This used Esmena 2C beam from the JH/Esmena series (pre-2014) is intended as a horizontal support between the uprights of a pallet racking. With a length of 2200 mm and a profile of 150 x 50 mm, this beam provides the basis for a stable beam pair construction, so that pallets and goods are correctly supported. The beam is supplied including 2 locking pins, essential for a locked connection within the racking bay.

Application in the warehouse

In daily warehouse logistics, a good beam determines the load-bearing structure of each level. This Esmena beam is used when building up or restoring racking bays where reliability and a proper fit within the Esmena system are important, for example when reorganizing or replacing damaged components.

Practical for replacement or expansion

Ideal for B2B buyers specifically looking for used racking materials to expand an existing Esmena pallet racking or replace an identical component. Thanks to the included locking pins, the beam is immediately ready for installation, saving time during maintenance and reconfiguration.

Suitable for pallets

With a beam length of 2200 mm, this beam pair accommodates two block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 europallet and 1 block pallet (two pallets in total) also fits. This size matches bays specifically set up for this type of pallet.