Used Esmena beam GNA 13541 - 3300 x 135 x 41 mm

Used beam for stable and safe pallet racking bays

This used Esmena 2C beam is intended as a load-bearing beam in a pallet racking system and, together with the frames, forms the level on which pallets or carriers rest. With a length of 3300 mm and a profile of 135 x 41 mm, this is a practical solution if you want to repair an existing Esmena system or adjust a bay layout. The beam is supplied including 2 locking pins for secure locking in the frame.

Application in the warehouse

In daily use, a beam ensures the correct span between uprights and a stable load distribution per storage level. This version is suitable for Esmena pallet racking (pre-2014) and is used when building or maintaining racking rows in storage, distribution, and production environments.

Practical for replacement or expansion

Ideal for B2B buyers who want to quickly replace a missing or damaged beam without renewing the entire bay. Thanks to the included locking pins, you can install it immediately and keep your racking capacity operational with trusted Esmena material.

Suitable for pallets

With a beam length of 3300 mm, this beam pair accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets in total) also fits. This size matches bays specifically configured for this type of pallet.