Used Esmena beam GNA 11641 - 3600 x 85 x 41 mm

Used beam for reliable load beam connection in your pallet racking

This used Esmena 2C beam is intended as a horizontal load beam in a pallet racking system and is supplied including 2 locking pins for secure locking. With a length of 3600 mm and a profile of 85 x 41 mm, this is a practical choice when you want to maintain or repair an existing Esmena setup (pre-2014) without unnecessary downtime.

Application in the warehouse

Together with the uprights, the beam forms the level on which pallets rest. In busy warehouses, proper locking is essential; the included locking pins help prevent unwanted detachment due to vibrations or impact. Ideal for storage locations where continuity and safety matter.

Practical for replacement or extension

Suitable for B2B buyers specifically looking for an Esmena GNA 11641 beam to replace damaged beams or to supplement a racking bay. By using used components, your racking material remains usable while maintaining a consistent setup within the same series.

Suitable for pallets

With a beam length of 3600 mm, this pair of beams accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 806.2 mm. This dimension matches bays specifically arranged for this type of pallet.