Used Esmena beam G 7540 - 2700 x 75 x 40 mm

Used tubular beam for stable and safe load-bearing beams in your pallet racking

This used Esmena tubular beam is intended as a horizontal beam in a pallet racking system and, together with the frames, forms a sturdy base for supporting pallet loads. The beam is supplied including 2 locking pins, so that the locking mechanism on the uprights can be properly secured. With a length of 2700 mm and a profile of 75 x 40 mm, this is a practical choice for anyone looking to maintain or expand Esmena racking material.

Application in the warehouse

You use this beam to create or restore levels in existing pallet racking. In environments where reconfiguration happens regularly or where damage can occur due to internal transport, a matching replacement beam is essential for the safety and continuity of storage.

Practical for replacement or expansion

Suitable for B2B buyers specifically looking for used Esmena beams (JH – Esmena pre-2014) as a pallet racking component. Ideal for maintenance, damage repair, or expansion with consistent racking material, without unnecessary investments in entirely new sections.

Suitable for pallets

With a beam length of 2700 mm, this beam pair accommodates three euro pallets (800 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 800 mm. This size matches bays specifically arranged for this type of pallet.