Used Bito beam PT95L - 3900 x 95 x 50 mm

Used pallet racking beam for wide spans and secure locking

This used Bito tube beam (type PT95L) is intended as a load-bearing beam in a pallet racking system and is supplied including 2 locking pins. With a length of 3900 mm and a profile of 95 x 50 mm, it forms a robust base for supporting racking levels and pallets over a larger bay width.

Application in the warehouse

A beam connects the frames and determines the bay layout and load-bearing structure of the racking. The included locking pins help secure the beam in place, which is important for stability and safe daily use during loading and unloading with a forklift or pallet truck.

Practical for replacement or extension

Suitable for B2B organisations looking to replace or extend Bito racking material with used parts. A quick way to swap out a damaged beam or create additional storage positions without immediately renewing an entire racking section.

Suitable for pallets

With a beam length of 3900 mm, this pair of beams accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 881.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.