Used Bito beam PT95L - 2200 x 95 x 50 mm

Sturdy used beam as a pallet racking component for safe bay layout

This used Bito tubular beam (type PT95L) is intended as a load-bearing beam in a pallet racking system and, together with the uprights, forms a stable beam pair for the storage of pallets and carriers. With a length of 2200 mm and a profile size of 95 x 50 mm, this is a practical choice when you want to maintain or extend an existing Bito system. The beam is supplied including 2 locking pins for secure locking.

Application in the warehouse

A beam determines the width of the bay and directly contributes to the safety and efficiency of your warehouse layout. This Bito beam is used at the desired levels to create storage locations, for example for pallet positions or shelves, depending on your setup.

Practical for replacement or expansion

Ideal for B2B buyers who want to quickly replace a damaged beam or realize additional levels using used racking materials. Thanks to the included locking pins, you can install directly and limit downtime in your operation.

Suitable for pallets

With a beam length of 2200 mm, this beam pair provides space for two block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between the pallets is maintained, which equates to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 europallet and 1 block pallet (two pallets in total) also fits. This size matches bays specifically set up for this type of pallet.