Used Bito beam PT150S - 2200 x 150 x 50 mm

Used tubular beam as a sturdy basis for safe pallet storage

This used Bito tubular beam is a load-bearing beam for pallet racking and, together with the frame, forms the level on which pallets are stably supported. The beam is supplied including 2 locking pins, so the connection to the uprights can be properly secured. With a length of 2200 mm and a profile size of 150 x 50 mm, this is a practical choice for repairing or building up racking bays with Bito components.

Application in the warehouse

In daily warehouse operations, a reliable beam directly determines the safety and usability of the pallet racking. This PT150S beam is used per level in a racking bay and helps limit deflection and unwanted displacement, partly due to the included locking pins.

Practical for replacement or extension

Ideal when you want to replace a damaged beam or add extra levels without renewing an entire racking system. You are purchasing a used Bito component aimed at quick assembly and a consistent setup of your pallet racking.

Suitable for pallets

With a beam length of 2200 mm, this beam pair accommodates two block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between the pallets is maintained, which corresponds to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 euro pallet and 1 block pallet (two pallets in total) also fits. This size matches bays specifically set up for this type of pallet.