Used Bito beam PT130M - 2200 x 130 x 50 mm

Used tubular beam as a reliable support beam for your pallet racking

This used Bito tubular beam (type PT130M) is intended as a horizontal support beam in a pallet racking system and is supplied including 2 locking pins for secure locking. With a length of 2200 mm and a profile size of approximately 130 x 50 mm, it supports racking levels in a stable, professional manner, suitable for intensive warehouse use.

Application in the warehouse

A beam connects two uprights and forms the basis for a storage level. This Bito beam is used when setting up or repairing a bay width, for example in case of damage, reconfiguration, or capacity expansion. The locking pins help prevent unwanted detachment due to vibrations or impact.

Practical for replacement or expansion

For B2B buyers, a used beam is an efficient choice to quickly make existing Bito racking operational again. You limit downtime, keep your configuration consistent, and have a directly applicable pallet racking part with the necessary locking.

Suitable for pallets

With a beam length of 2200 mm, this beam pair fits two block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between the pallets is maintained, corresponding to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 europallet and 1 block pallet (two pallets total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.