Used Bito beam PT110L - 3900 x 110 x 50 mm

Reliable used beam for stable load-bearing capacity in your pallet racking

This used Bito tube beam is intended as a horizontal support between the uprights of a pallet racking system and forms the basis for safe and organized storage. Thanks to its length of 3900 mm, this component is suitable for wide bay layouts, while the compact 110 x 50 mm profile offers a solid, practical solution for daily warehouse loads. Supplied including 2 locking pins for correct locking.

Application in the warehouse

You use this beam to create racking bays at height and to support pallets or carriers in a fixed position. The locking pins help limit unwanted disengagement caused by vibrations or impact, which is important during intensive internal transport and varying loads.

Practical for replacement or expansion

Ideal when you want to restore an existing Bito setup after damage, rearrange bays, or add extra capacity using used racking materials. An efficient choice for B2B buyers looking for a readily available, functional pallet racking component without unnecessary downtime.

Suitable for pallets

With a beam length of 3900 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 881.2 mm. This size matches bays specifically set up for this type of pallet.