Used Bito beam PT110L - 3600 x 110 x 50 mm

Reliable used beam for stable pallet racking bays

This used Bito tubular beam is intended as a load-bearing element in a pallet racking system and, together with the uprights, forms the level on which pallets and carriers are safely placed. With a length of 3600 mm and a profile of 110 x 50 mm, this is a practical choice for repairing or expanding existing Bito setups. The beam is supplied with 2 locking pins for secure locking into the frame.

Application in the warehouse

In everyday warehouse use, a good beam is essential for a stable bay layout and a neat, reproducible storage structure. This beam is used to create or replace levels where damage, wear, or reorganization of the racking calls for it, so that the racking remains safe and functional.

Practical for replacement or expansion

For B2B buyers who need parts quickly, a used beam offers an efficient solution to limit downtime and adjust a racking layout in a cost-conscious way. Thanks to the included locking pins, installation is possible immediately within a Bito configuration.

Suitable for pallets

With a beam length of 3600 mm, this pair of beams accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 806.2 mm. This dimension corresponds to bays specifically arranged for this type of pallet.