Used AR beam Ref. 125 - 3900 x 120 x 50 mm

Robust used beam for a safe and efficient pallet racking

This used AR Racking beam is a load-bearing beam for pallet racking and is supplied with 2 locking pins for reliable locking in the frame. With a length of 3900 mm and a profile size of 120 x 50 mm, this is a practical choice when you want to repair or expand an existing racking bay with matching racking material.

Application in the warehouse

Together with the uprights, beams form the basis of every pallet racking: they carry the loads and determine the bay layout. This AR beam is used to build up levels or to replace them in case of damage, reorganisation or growth in storage capacity, with the locking pins helping to prevent unwanted detachment during use.

Practical for replacement or expansion

For B2B buyers, used AR Racking is a quick solution to limit downtime and keep racking consistent. Thanks to the included locking pins, you can install it immediately and make the racking level operational again without unnecessary detours.

Suitable for pallets

With a beam length of 3900 mm, this pair of beams accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 881.2 mm. This size matches bays specifically configured for this type of pallet.