Gebruikt Jungheinrich Frame STD'B' 15 - 6500 x 1100 mm - compleet

Used frame as a solid basis for your pallet racking section

This used Jungheinrich pallet racking frame is a complete upright frame for building up or restoring a racking bay. With a height of 6500 mm and a depth of 1100 mm, the frame forms the load-bearing side of your racking and provides stability and alignment of the beams in your warehouse setup. This is a Jungheinrich Type 15 design with uprights of 100 x 65 mm, supplied including bracing, base plates and fastening material.

Application in the warehouse

A frame is placed on the floor and carries, together with the adjacent frame, the load of pallets via the beams. This type of component is essential for damage repair after impact, for extending existing rows or for reorganising storage capacity, without unnecessary downtime.

Practical for replacement or expansion

Because the frame is supplied complete and usually arrives assembled (unless otherwise stated), you can get on with installation faster. Ideal for businesses actively seeking used Jungheinrich racking materials to control costs while remaining professional.

Possible beam configurations and pallet heights

For a frame height of 6500 mm, the following beam configurations are possible (bay height and maximum pallet height per level, from bottom to top):

3 beams

4 beams

5 beams